Description
The new HEPA filtered PCR Chamber, includes all of the same basic features as the standard PCR Chamber, but includes a factory installed HEPA filter system. The HEPA filter system is rated at 99.9997% efficiency at 0.3 (μ) microns.
No tools are required for HEPA filter change over. This is a positive pressure research chamber. The fan (blower) noise level is rated at less than 40 dBA.The 825-PCR/HEPA includes a "Mini HEPA" filter; size 4" x 9.5" x 1" thick.
This PCR Chamber has been designed to help improve the accuracy of P.C.R. and general tissue culture procedures. The chance for air borne contamination during D.N.A. sequencing is greatly reduced.
The chamber is a “still air enclosure” which contains both Plas-Labs “Bright Light” illumination system and a U.V. germicidal lamp. The U.V. germicidal system is rated at 254 nm and will decontaminate all exposed surfaces in the interior. The lamp timer should be activated 15 minutes before and 15 minutes after each use. The front viewing panel and main housing are .375” (9.5 mm) thick optically clear material. This thickness helps to prolong the service life (about 2,500 operating hours) of the unit. The front viewing panel is attached by six (6) screws and is easily and quickly replaced, if needed. Access to the interior of the chamber is gained by pulling swinging doors outward.
New self closing hinges have eliminated the need for locks. The doors are removable, therefore do not take up valuable lab counter space. If a corner door is accidently opened, proximity sensors turn off the U.V. system for operator safety.
Features:
- “Bright Light” illumination system (40,000 hour lamp guarantee).
- Two bright white plastic (adjustable) shelves. One is tooled to store pipettors..
- Front panel is .375” thick (9.5 mm) for Beta Ray protection. NOTE: Not Gamma Rays.
- Removable side access doors with slip apart hinges.
- Proximity sensors on doors for operator safety.
- Automatic timer to activate U.V. sterilization procedures.
- Bottom tray has a formed in place “spill guard” for easy cleaning.
- The U.V. system is rated at 254 nm.
- Standard 24 month warranty (Not gloves or consumables).
- Side and back walls are one piece formed optically clear acrylic .375” thick (9.5 mm).
- Main housing and top are removable for installation of large pieces of equipment.
Specifications
Inside Dimensions:
23.5"w x 17"d x 21"h
597mm x 432mm x 530mm
Outside Dimensions:
26"w x 23"d x 28" h
610mm x 457mm x 711mm
Shipping Weight:
112 lbs
51 kg