The XFP-1 FluxPenser
The Katanax XFP-01 FluxPenser is a flux dosing machine that automatically calculates and accurately dispenses the required amount of flux to the sample. With the XFP-01 FluxPenser, your lab will gain efficiency, precision and excellent reproducibility in sample and flux weighing.
The FluxPenser can dispense granular or micro bead flux for optimal flexibility. Dispensing parameters can be adjusted to desired speed and dispensing precision for flux type.
The XFP-01 FluxPenser has two operating modes:
- Mode 1: High accuracy flux dosing and weighing (absolute mode)
- Mode 2: Automatic flux dispensing to obtain a desired flux/sample ratio (relative mode). The sample is weighed, ten flux is added to the desired ratio. Sample is in a sandwich of flux to facilitate mixing and protect platinumware.
Zero-touch operation for absolute mode flux dispensing and one-touch operation for ratio mode.
Accuracy
- Accurately adds flux at the desired weight, adjustable between 1 mg and 100m mg
Efficiency
- Automates weighing task, avoiding repetitive strain
- Low energy consumption with high throughput
- Dispenses flux in approximately one minute
Versatility
- Silo is provided to facilitate flux reloading, while minimizing contamination and moisture exposure
Connectivity
- Communicates with most x-ray software, only requiring the user to select the pre-registered model and suitable interface with analytical scale
- LIMS compatible
Simplicity and Robustness
- Simple set up and low maintenance
- Robust construction with no soft tubing
| Voltage | 110-220 VAC, single-phase |
| Frequency | 50/60 Hz |
| Maximum Power | 4000 Watts |
| Weighing Unit Width | 20 cm (7.9 in.) |
| Weight Unit Depth | 45 cm (17.7 in.) |
| Controller Width | 20 cm (7.9 in.) |
| Controller Depth | 20 cm (7.9 in.) |
| Assembled System Width | 50 cm (20 in.) |
| Assembled System Depth | 50 cm (20 in.) |
